Finest
off-road Suspension
for SX and Enduro
by KORR &
WP
In-stock WP
Shocks & Forks
for KTM
EXC-XCF-SXF
also
Husaberg FX and FE
390-570
WP
Geniune Seals and
Bushes CLICK
HERE>>

|
WP Trax
Shock 2007-2012
KTM SX, XC &
EXC also
Husaberg &
recent Japanese
Models
The WP
Trax shock is
the result of
several
years
development by
WP in GP MX
and World
Enduro, WP
Trax is the
ultimate shock
for off-road
racing, an
exact copy of
what the
Factory Teams
are using. The
Trax system
allows for
fast rebound
when there is
no load on the
shock due to a
drop out
mechanism in
its base , so
when the wheel
lifts off the
ground a
rebound
circuit opens
and the shock
can recover to
full extension
in a fraction
of a second,
the shock is
then ready to
absorb the
next bump with
full travel,
only WP has
this
technology on
a Motorcycle
Shock. This
system gives
much better
traction than
a conventional
shock, it
stops the
packing affect
of a stock
shock,
basically you
get the best
of both
worlds, good
level of
rebound to
keep control
when the
wheels on the
ground , but
fast rebound
and
recovery
when the wheel
leave's the
ground to
prevent shock
"Packing" and
get the wheel
back on the
floor as
quickly as
possible in
order to
accelerate
again and
expect the
next bump.
How its
works:- In the
base of the
shock above
the clevis and
before the
spring
holder
there is a
small
mechanism
which is
preloaded by
small springs
which
basically
moves between
1 and 2mm to
when there is
no load on the
shock, this
open's and
close's a
rebound oil
circuit via a
needle valve,
when there is
pressure on
the shock the
mechanism is
forced up
which closes
the rebound
oil circuit
and it
operates as a
normal shock,
when weight is
taken off the
shock the
small springs
push out the
clevis and
this opens an
oil circuit
giving ultra
fast rebound.
A very simple
idea but not
simple to
Engineer, this
technology is
also used in
Rally Cars.
Not only does
the Trax shock
benefit from
the fast
rebound system
it's also
manufactured
to better
tolerances
than a stock
shock using
higher quality
materials, the
main shock
body is
manufactured
from steel to
give
consistent
damping when
hot and
improved
durability.
For bikes
fitted with
PDS system ie
Husaberg and
KTM
EXC's
the internal
design is far
different from
the stock
PDS
shock, the
Trax shock
has far
more
progressive
damping
and better
bottoming
resistance
without having
mid stroke
harshness,
massive
improvement
over stock on
square edged
bumps. Unlike
stock shocks
the rebound
damping
adjustment has
no effect on
the
compression
damping due to
a one way
valve and
there is high
and low speed
compression
adjustment.
Anyone who
thinks a
linkage is
better than
PDS should try
this system,
they will
change their
opinion quite
quickly, but
this system
also benefits
bikes fitted
with a
linkage. World
wide you will
see all
leading KTM
and Husaberg
teams using
the WP Trax
system.
>>
Unique Trax
rebound system
improves
traction
>>
Prevents shock
packing on
Multiple bumps
>>
Keeps shock
higher in the
stroke for a
better feel
and more able
to absord the
next hit
>>
Improves
stability and
comfort,
meaning you
will be less
tired
>>
Better
acceleration
>>
More accurate
Damping
adjustment
with a bigger
range than
stock shocks
>>
High Quality
CNC components
>>
Less fading
then stock
shock with
more
consistent
perfomance
>>
Available for
all KTM's and
most Japanese
bikes 125cc +
>>
Now available
for Husaberg 2
and 4 strokes
>>
Set up from
the box for
your weight,
ability and
requirements
****
Produced in
limited
numbers, order
early to avoid
disappointment.
All shocks
supplied by us
are set up
according to
your
requirements,
ie spring
fitted per
your weight
and ability
and settings
fine tuned, we
don't supply
one shock that
fits all !!!!
* Trax shock
is designed
purely with
perforamnce in
mind, the
complexity of
the design
means it
requires more
regular
servicing than
a regular
shock to
maintain
performance
and
reliability,
service
intervals
depend as
always on the
conditions the
shock is used
in. Trax
shocks should
only be
serviced by
trained and
experienced WP
technicians,
they require
specialist
knolwledge and
tools. We
recommend
service every
30 hours.
WP Trax
Linkage Shock
KTM or
Jap
£1195
inc vat
KTM - Husaberg
PDS Trax
shock
£1295
inc vat
See
package price
deal at page
bottom
|

|
WP Cone
Valve Fork -
All Models
The
WP 2012 Cone
valve fork is
a 48mm replica
of the forks
used by all
KTM factory
riders using
the same
internal
design, the
cone-valve
arrangement is
used to
control
compression
damping
instead of
shims,
which
increases
durability and
gives a more
progressive
damping curve
without
sacrificing a
nice plush
feel. This is
the ultimate
fork for MX,
Enduro or
Supermoto. As
with Shock all
Forks supplied
by KORR are
pre-set to
suit your
weight and
ability.
>>
Available for
KTM's EXC/XC
and SX
>>
Available for
Husaberg
>>
Available for
RM, CRF, KX
and YZF
>>
High quality
CNC Components
>>
External
Pre-load
adjustment
>>
Twin Chamber
design for
consistent
damping
>>
Cone Valve
Damping for
plusher ride
and better
Bottoming
resistance
>>
DLC coated
stanchions for
less stiction
>>
More
controlled
ride, better
stability,
plusher feels
and much less
tiring to
ride, no
revalve job
can conmpare
to the feel of
these.
>>
Set up from
the box for
your weight,
ability and
requirements
*2012 WP
48mm Cone
Valve fork
from
£2295
inc vat
*Please
note we try to
hold stock of
Forks, but
generally
demand is much
higher than
supply, they
are built in
limited
numbers, order
early to avoid
disappointment,
there can be
up to 2 months
waiting time.
Taking orders
now for 2012
stock , New
Fork stock
arriving
shortly -
expected mid
February,
shocks already
in-stock.
<<< Special offer >>>
All
sets of Fork +
Shock
reserved and
deposit paid
before
February 29th
will
receive 10%
discount ,
Free WP
T-Shirt and
Pit Cap
2012
Discounted
Fork and
Linkage shock
package price
£3150
inc vat
2012
Discounted
Fork and PDS
shock package
price
£3250
inc vat
Strickly first
come priority,
limited amount
of stock
available,
once our
allocated
stock has sold
the offer will
finish.
|
|
New WP
Aftermarket
Suspension and
Service
available
from:-
Triple-D
Motosport, Kendal,
Cumbria,
Tel: 01539
732666
For
advice and
trade parts
supply email:
info@ktmoffroadracing.co.uk
For
Suspension
Retail sales
and
service
contact: neil@d3racing.co.uk
General
WP Spare parts
such as Seals
and Bushes can
be purchased
on Ebay
CLICK
HERE >>
|
.
|
---------------------------------------------------------------------------------------------------------------------------------------
Suspension Set up
sheet basic info - PDF file>>>
---------------------------------------------------------------------------------------------------------------------------------------
|
28/01/2012
|
|
|